Models - DSM (1990-1999) - Electronics & Gauges - Page 1

AEM UEGO X-Series Wideband

MSRP:

Was:

Now: $189.94

Add to Cart
ECMTuning - Speed Density Bundle (GM-style MAP, IAT, pigtails and bung)

MSRP:

Was:

Now: $115.00

Choose Options
Haltech Oil Temperature Sensor High Range Thread: 1/8 NPT 27TPI

MSRP:

Was:

Now: $85.00

Add to Cart
Haltech Nexus R5 VCU

MSRP:

Was:

Now: $4,300.00

Choose Options
Haltech Elite 1500 + Premium Universal Wire-in Harness Kit (Universal)

MSRP:

Was:

Now: $2,002.00

Add to Cart
ECMTuning - 2G DSM MDP

MSRP:

Was:

Now: $20.00

Add to Cart
AEM X-Series GPS Speedo Gauge 0-160 MPH

MSRP:

Was:

Now: $171.35

Add to Cart
ECMTuning - Speed Density Cable (DSM / EVO 1-3)

MSRP:

Was:

Now: $65.00

Choose Options
ECMTuning - 1G into a 2g CAM Angle Sensor

MSRP:

Was:

Now: $75.00

Choose Options
ECMTuning - Speed Density Ethanol Sensor Adapter (DSM / EVO 1-3)

MSRP:

Was:

Now: $40.00

Choose Options
ECMTuning - USB Datalogging Cables (ECMLink V3 Only)

MSRP:

Was:

Now: $75.00

Choose Options
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG)

MSRP:

Was:

Now: $155.27 - $167.78

Choose Options
AEM Ethanol Content Flex Fuel Sensor Kit

MSRP:

Was:

Now: $197.63 - $222.73

Choose Options
Haltech Elite 1500 ECU

MSRP:

Was:

Now: $1,605.00

Add to Cart
Haltech Triple Switch Panel Kit

MSRP:

Was:

Now: $274.00

Add to Cart
AEM Replacement Brass Sensor Kits

MSRP:

Was:

Now: $66.10 - $66.75

Choose Options
Haltech WB1 Single Channel CAN O2 Wideband Controller Kit

MSRP:

Was:

Now: $344.00

Add to Cart
Haltech 8 Button (2x4) CAN Keypad

MSRP:

Was:

Now: $354.00

Add to Cart
Haltech Elite 1500 w/ Basic Universal Wire-in Harness Kit (Universal)

MSRP:

Was:

Now: $1,927.00

Add to Cart
Haltech Elite 750 w/ Premium Universal Wire-in Harness Kit (Universal)

MSRP:

Was:

Now: $1,557.00

Add to Cart
Haltech Elite 750 w/ Basic Universal Wire-in Harness Kit (Universal)

MSRP:

Was:

Now: $1,438.00

Add to Cart
AEM Digital Trans Oil Water Temperature Gauge

MSRP:

Was:

Now: $182.85

Add to Cart
Sensor - Crankshaft Trigger Wheel/Blade (2G DSM - EVO 8/9)

MSRP:

Was:

Now: $21.75

Add to Cart
AEM Digital 8-18V Voltmeter Gauge

MSRP:

Was:

Now: $124.88

Add to Cart

AEM UEGO X-Series Wideband

AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patent-pending X-Digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband...

MSRP:

Was:

Now: $189.94

Add to Cart
ECMTuning - Speed Density Bundle (GM-style MAP, IAT, pigtails and bung)

The complete set up for running speed density with ECMLink. A reliable 4-bar MAP sensor and a GM IAT sensor complete with pigtails and bung.If you're looking for true "plug-n-play" then be sure to check out ECMLink's direct-connect SD cable. This SD...

MSRP:

Was:

Now: $115.00

Choose Options
Haltech Oil Temperature Sensor High Range Thread: 1/8 NPT 27TPI

Haltech Oil Temperature sensor High Range 150°C #HT-010306

MSRP:

Was:

Now: $85.00

Add to Cart
Haltech Nexus R5 VCU

Outputs: Up to 18 injector and 12 ignition Suits: Engines with up to 12 cylinders or up to 6 rotors. Racing applications where advanced race features, data logging and power management control is required. Includes: Nexus R5 VCU, SurLok...

MSRP:

Was:

Now: $4,300.00

Choose Options
Haltech Elite 1500 + Premium Universal Wire-in Harness Kit (Universal)

HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and...

MSRP:

Was:

Now: $2,002.00

Add to Cart
ECMTuning - 2G DSM MDP

This adapter bolts into place of the factory MDP sensor on top of the stock 2G intake manifold. You can either screw in the included 1/4" x 1/8" NPT hose barb fitting and run a short vacuum hose to your boost sensor or directly connect an AEM boost...

MSRP:

Was:

Now: $20.00

Add to Cart
AEM X-Series GPS Speedo Gauge 0-160 MPH

Display ground speed, course and altitude via an included 10Hz GPS receiver. Integrates with Infinity ECU, Series 2 EMS or EMS-4 to add track mapping, and an included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need...

MSRP:

Was:

Now: $171.35

Add to Cart
ECMTuning - Speed Density Cable (DSM / EVO 1-3)

This cable allows the user to install a GM or AEM IAT sensor and any GM-style MAP sensor (including ECMLink's 4-bar GM-style sensor) without the hassle of cutting wires on the factory wiring harness. Just plug this harness in to your stock MAS connector...

MSRP:

Was:

Now: $65.00

Choose Options
ECMTuning - 1G into a 2g CAM Angle Sensor

ECMTuning's 1G-in-a-2G CAM angle sensor adapter harness allows for the installation of a 1G style Cam Angle Sensor into a 2g car without a fuss! One end plugs directly into the 1G CAM/Crank combination sensor and the other end plugs directly into the...

MSRP:

Was:

Now: $75.00

Choose Options
ECMTuning - Speed Density Ethanol Sensor Adapter (DSM / EVO 1-3)

This harness adapter has a connector for a standard GM-style ethanol sensor on one end and loose terminals on the other end that plug into our SD cable's MAF connector. Specify whether you have a 1G DSM, 2G DSM or EVO1-3 MAF connector end on your SD...

MSRP:

Was:

Now: $40.00

Choose Options
ECMTuning - USB Datalogging Cables (ECMLink V3 Only)

Please do NOT order this cable unless you KNOW what you're doing. You can not reprogram your factory EPROM chip with this cable. You can not use this cable with a variety of other software packages. And you can not use this cable to replace your lost...

MSRP:

Was:

Now: $75.00

Choose Options
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG)

AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous...

MSRP:

Was:

Now: $155.27 - $167.78

Choose Options
AEM Ethanol Content Flex Fuel Sensor Kit

AEM offers two Fuel Ethanol Content (Flex Fuel) Sensor Kits, one with 3/8” barbed adapter fittings and one with -6AN to 3/8” adapter fittings.AEM’s Flex Fuel Ethanol Content Sensor Kits measure a vehicle’s fuel ethanol content percentage and fuel...

MSRP:

Was:

Now: $197.63 - $222.73

Choose Options
Haltech Elite 1500 ECU

ECU OVERVIEW Elite 1500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4vcylinder, Drive-By-Wire (DBW) or 2 rotor engines, EFI conversions, engines with multiple variable camshafts...

MSRP:

Was:

Now: $1,605.00

Add to Cart
Haltech Triple Switch Panel Kit

Triple Switch Panel Only - includes Yellow & Red knobs 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) #HT-010510

MSRP:

Was:

Now: $274.00

Add to Cart
AEM Replacement Brass Sensor Kits

Brass Gauge style (PSIg) Pressure SensorsAEM offers brass PSIg sensors in 15, 100 and 150. Gauge style pressure sensors reference pressure above atmospheric pressure. When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig...

MSRP:

Was:

Now: $66.10 - $66.75

Choose Options
Haltech WB1 Single Channel CAN O2 Wideband Controller Kit

Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs...

MSRP:

Was:

Now: $344.00

Add to Cart
Haltech 8 Button (2x4) CAN Keypad

Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit Notes: Not compatible with Platinum or earlier...

MSRP:

Was:

Now: $354.00

Add to Cart
Haltech Elite 1500 w/ Basic Universal Wire-in Harness Kit (Universal)

HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and...

MSRP:

Was:

Now: $1,927.00

Add to Cart
Haltech Elite 750 w/ Premium Universal Wire-in Harness Kit (Universal)

HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other . All the wires at the unterminated end are colour coded and...

MSRP:

Was:

Now: $1,557.00

Add to Cart
Haltech Elite 750 w/ Basic Universal Wire-in Harness Kit (Universal)

HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and...

MSRP:

Was:

Now: $1,438.00

Add to Cart
AEM Digital Trans Oil Water Temperature Gauge

AEM’s Digital Coolant Temperature Gauge unites unsurpassed accuracy, speed and control with an easy to read, digital LED interface. AEM digital gauges also offer a 0-5v analog output for use with data loggers and virtually any engine management system,...

MSRP:

Was:

Now: $182.85

Add to Cart
Sensor - Crankshaft Trigger Wheel/Blade (2G DSM - EVO 8/9)

Mitsubishi OEM Crank Trigger Wheel/Blade for 7-bolt 2G DSM or EVO 8/9

MSRP:

Was:

Now: $21.75

Add to Cart
AEM Digital 8-18V Voltmeter Gauge

AEM’s Digital Voltage Gauge unites unsurpassed accuracy, speed and control with an easy to read, digital LED interface. AEM digital gauges also offer a 0-5v analog output for use with data loggers and virtually any engine management system, such as the...

MSRP:

Was:

Now: $124.88

Add to Cart